Tuesday, July 26, 2011

Maxi Bustle Skirt Tutorial

Hi all! I shared this tutorial a couple of weeks ago on Me Sew Crazy. In case you missed it, here is how to make a maxi bustle skirt, perfect for moving from summer into fall...

It has been years since I have made an article of clothing for myself to wear. I mean, like, eight years. And even then, it was a maternity skirt. I have done more sewing in the last year than I have in the over a decade (ouch!)since I graduated with my Bachelor's Degree in Fashion Design. And most of that has been for my daughter and my customers.

But, a couple of weekends ago, I made myself not one but two skirts. They fit exactly what I was needing in my wardrobe, long skirts. Long skirts with extra fullness in the back to give them a little polish. And long skirts that slip on and are comfortable to wear.

Photobucket


Photobucket


Could you use such a skirt in your wardrobe? Well, I am about to show you how ridiculously easy it is.

You'll need 1 inch wide elastic, fabric and coordinating thread. I have made this skirt in both cotton and lightweight wool so it will take to a good range of fabric choices. You do, however, need to make sure that it is either 50 inches wide or more, or else make sure that it doesn't have a directional print. That way you can use the selvage edges for the top and bottom and the yardage for your width. Does that make sense?

You'll need a rectangle of fabric measuring 50-60 inches wide by the length you'll want your skirt to be plus inches for hem and your upper casing. To get that measurement, measure from above your belly button to where you want the front of the skirt to hit. Then add three inches for the top and three inches for the bottom.

Photobucket


Now that you have your fabric ready, let's get started. Take your two shorter ends and sew them together and finish them however you like. If you have a serger, use that. If you want to zig zag it, go for it. Personally, though I do own a serger, I use a french seam. If you have no idea what that is, follow along with me.

Sew your two shorter sides together WRONG sides together with a 1/4 inch seam allowance. I know, it will feel sacrilegious, but I promise it will be okay.

Photobucket


Next, turn it inside out and sew it again, RIGHT sides together this time, with a 1/2 inch seam allowance. This way you capture the raw edges inside and you have a lovely finished seam.

Photobucket


Now on to the waist. You'll want to finish your raw edge either by serger again, or by folding it over and sewing it down all the way around the skirt at a 1/4 inch. Next, fold the skirt in half to find the middle of the waist and lay it flat on the table. Measure 12 inches from the center on both sides and mark with a pin. Like so:

Photobucket


Fold the waist over an 1 1/2 inch and starting from one pin sew a casing along the back to the other pin, making sure to back tack at the start and at the end.

Photobucket


Cut yourself a length of elastic about 11 inches long. Or you can do the math. Ideally you want to match your waist measurement. The front of the skirt is 24 inches so subtract that from your waist measurement(keeping in mind that the skirt will sit high on your waist in the front)and you should know how long you want your elastic. Just be sure to add 1/2 an inch for seam allowance. Now thread your elastic through the casing you just made. (Be careful not to loose the end of it in the casing.)

Photobucket


Sew over the encased elastic at both ends, going over it a couple of times to ensure all is secure.

Photobucket


Next, sew down the front of the waist picking up where you left off at the elastic.

The last thing you need to do is hem it. You can do this however you like of course. My preferred method is to give it at least a two inch hem, as it looks more professional, and a double stitch line. And I use hemming lace. I do not mind hemming nearly so much since I have discovered this method.

Photobucket


Now try it on and see how the waist fits, if (like I did the first time) you need the waist to be tighter, use your seam ripper to open a small section in the center of the waist, pull the elastic out a bit and cut off the necessary amount, sew the ends of the newly cut elastic together, pop it back in and sew up the little opening.

Photobucket


And there you have it. I told you, it was ridiculously easy. And it leaves lots of room for embellishing. You can add a ruffle or two to the hem, you can add a sash that ties in the back and covers the elastic casing. You can make it not so maxi.

You can make it wild.

Photobucket


Or you can make it classic.

Photobucket


Make it your own. Most of all, have fun!

6 comments:

LrSchwtz said...

That's impressive! I love how they turned out. Please stop by www.laughloveandcraft.com and link up to my Share the Wealth Wednesday Link Party! I'm your newest follower!

whitney said...

love it!! im having a giveaway for a beautiful vintage tin! please share the word and sign up
www.bamitsvintageglam.blogspot.com

thx xox

Unknown said...

Great tutorial! I had to drop by and see what you meant by 'bustle'. Ha! I had a bustle on my wedding dress - my 1st wedding ;) - years and years ago, but it was a little, um, pouffier :D

This skirt is just darling. Might help my too-flat booty. Dropping by from Show & Tell.

BonBon Rose Girls Kristin said...

I'm with Jill...I wish I had your sewing skills! That's gorgeous!

Kara @ Mine for the Making said...

LOVE this skirt! You are so so talented. Thanks for linking up to DIY Diva thursdays :)

Lauren Rose said...

Gorgeous, this is such a great maxi skirt tute! I think I'm going to try this out next week! I only wear skirts, and below the knees only, so this is a pretty sweet option. Thanks for sharing! <3 Rose